BEHA HEATER PV8 800W SMART& TIMER

319 €
In Stock
SmartHeater with steel front H:40cm B:67,9cm D:9cm Effekt:800 watt Max 80°C The Beha PV8 WI-FI panel convector heater is stylish, compact and economical. This heater is ideal for heating a bedroom, study or any small room around your home. The Beha PV8 WI-FI convector heater is 800 watt's and is designed to be wall mounted. Beha with Wi-Fi thermostat, fits in to your home with style. Colours available, White

Product advantages

System requirements: Wi-Fi router must be set up with 2,4 GHz og WPA2 under installation. In addition, the heater has the following functions:

  • Splashproof (IP24) – The heater is approved for use in bathrooms if it is installed by a certified electrician
  • Double insulated (Cl. II) – requires no grounding
  • Protected against overheating – A fuse cuts the power if the internal temperature of the heater gets too high
  • The temperature can also be adjusted locally on the heater, without a Wi-Fi connection
  • Cable length 1,5 m
  • 5 year warranty

Please note. It is important to check that the room intended for the installation of the heater has a strong wifi signal from the router. If not then this can be rectified by purchasing a plug-in wi-fi extender to boost the signal.

                PV8 WI-FI Convector Heater
                     Technical Specifications

Watt 800W
Width 67.9 cm
Height 40 cm
Depth (incl wall bracket) 8,3 cm
Distance between wall brackets 31 cm
Colour White
Accuracy of the thermostat 0,2°C at 20°C room temperature
Front panel’s Surface temperature Maximum 80°C at 20°C room temperature
Clear distance below the heater 10 cm
Clear distance sideways 2 cm
Clear distance above the heater 10 cm
Delivered with 1,5m long cable with plug
220 - 240 volt
On/off switch and electronic thermostat
Double insulated
Splash security IP24 (suitable for wet areas)

The wall-frame depth 3,3 cm

BEHA
Convector Heaters