BEHA HEATER PV15 1500W WI-FI & TIMER
-
Product advantages
System requirements: Wi-Fi router must be set up with 2,4 GHz og WPA2 under installation. In addition, the heater has the following functions:
- Splashproof (IP24) – The heater is approved for use in bathrooms if it is installed by a certified electrician
- Double insulated (Cl. II) – requires no grounding
- Protected against overheating – A fuse cuts the power if the internal temperature of the heater gets too high
- The temperature can also be adjusted locally on the heater, without a Wi-Fi connection
- Cable length 1,5 m
- 5 year warranty
Please note. It is important to check that the room intended for the installation of the heater has a strong wifi signal from the router. If not then this can be rectified by purchasing a plug-in wi-fi extender to boost the signal.
PV15 WI-FI Convector Heater
Technical SpecificationsWatt 1500W Width 117.5 cm Height 40 cm Depth (incl wall bracket) 8,3 cm Distance between wall brackets 61 cm Colour White Accuracy of the thermostat 0,2°C at 20°C room temperature Front panel’s Surface temperature Maximum 80°C at 20°C room temperature Clear distance below the heater 10 cm Clear distance sideways 2 cm Clear distance above the heater 10 cm Delivered with 1,5m long cable with plug 220 - 240 volt On/off switch and electronic thermostat Double insulated Splash security IP24 (suitable for wet areas) The wall-frame depth 3,3 cm
5 Years Warranty