BEHA HEATER PV10 1000W WI-FI & TIMER
SmartHeater with steel front
Classic design with long life span
H:40cm B:80,3cm D:9cm Effect:1000 watt
Max heating temp:Max 80°C
The Beha PV10 WI-FI panel convector heater is stylish, compact and economical. This heater is ideal for heating a bedroom, study or any room around your home.
The Beha PV10 WI-FI convector heater is 1000 watt's and is designed to be wall mounted.
Beha with Wi-Fi thermostat, fits in to your home with style.
Colours available, White
Classic design with long life span
H:40cm B:80,3cm D:9cm Effect:1000 watt
Max heating temp:Max 80°C
The Beha PV10 WI-FI panel convector heater is stylish, compact and economical. This heater is ideal for heating a bedroom, study or any room around your home.
The Beha PV10 WI-FI convector heater is 1000 watt's and is designed to be wall mounted.
Beha with Wi-Fi thermostat, fits in to your home with style.
Colours available, White
255,00 €
Description
Product advantages
System requirements: Wi-Fi router must be set up with 2,4 GHz og WPA2 under installation. In addition, the heater has the following functions:
- Splashproof (IP24) – The heater is approved for use in bathrooms if it is installed by a certified electrician
- Double insulated (Cl. II) – requires no grounding
- Protected against overheating – A fuse cuts the power if the internal temperature of the heater gets too high
- The temperature can also be adjusted locally on the heater, without a Wi-Fi connection
- Cable length 1,5 m
- 5 year warranty
Please note. It is important to check that the room intended for the installation of the heater has a strong wifi signal from the router. If not then this can be rectified by purchasing a plug-in wi-fi extender to boost the signal.
PV10 wi-fi Convector Heater
Technical Specifications
| Watt | 1000W |
| Width | 80.3 cm |
| Height | 40 cm |
| Depth (incl wall bracket) | 8,3 cm |
| Distance between wall brackets | 31 cm |
| Colour | White |
| Accuracy of the thermostat | 0,2°C at 20°C room temperature |
| Front panel’s Surface temperature | Maximum 80°C at 20°C room temperature |
| Clear distance below the heater | 10 cm |
| Clear distance sideways | 2 cm |
| Clear distance above the heater | 10 cm |
| Delivered with 1,5m long cable with plug | |
| 220 - 240 volt | |
| On/off switch and electronic thermostat | |
| Double insulated | |
| Splash security IP24 (suitable for wet areas) | |
|
The wall-frame depth 3,3 cm |
|
Brand
BEHA
TYPE
Convector Heaters
